FLIR Quasar Gen II Series CM-6212 H1-I, Руководство пользователя и инструкция по установке, Страница: 119 / 146

113 September 6, 2017
Configuration and Operation
CM-6212 H1-I User and Installation Guide
Contrast
Camera image contrast level is adjustable. Select from a range of -6 to +19. The default setting is
DEFAULT. Click SET to confirm the new setting.
Saturation
Camera image saturation level is adjustable. Select from a range of -6 to +19. The default setting is
DEFAULT. Click SET to confirm the new setting.
Hue
Camera image hue level is adjustable: select from a range of -12 to +13. The default setting is DEFAULT.
Click SET to confirm the new setting.
9.5.3 Advanced Picture Settings
The Advanced Picture Settings screen is used configuring the following settings:
White Balance Backlight WDR Function Noise Reduction Settings
9.5.3.1 White Balance
Options for controlling the camera’s white balance (color balance) are shown below.
Advanced Picture Settings Screen – White Balance
A camera needs to find a reference color temperature as a way of measuring the quality of a light source
for calculating all other colors. The unit for measuring this ratio is in Kelvin (°K) degrees. You can select
one of the White Balance control modes according to the operating environment. The table below shows
the color temperature of some light sources for reference.
Light Sources Color Temperature (in K°)
Cloudy Sky 6,000 to 8,000
Noon Sun and Clear Sky 6,500
Household Lighting 2,500 to 3,000
75-watt Bulb 2,820
Candle Flame 1,200 to 1,500