7
Camera Installation
3. CAMERA INSTALLATION
1.
Use the mounting plate or template
to drill holes for the mounting screws
and cables. Align the mounting plate
with the TOP mark facing you. If
mounting the camera to a wall, make
sure that TOP mark is also facing up.
Attach the mounting plate to the
surface using the mounting plate
screws (4x).
1
Mounting
plate
Mounting screw holes
TOP
NOTE:
Acceptable mounting surfaces
for wall/ceiling mounts are as follows:
• Concrete wall/ceiling.
• Plasterboard wall/ceiling.
• Solid board wall/ceiling.
NOTE:
Use the included drywall anchors if installing in drywall.
2.
Make sure the hinge screw (1x) is
attached to the back of the
camera.
Hinge screw
2
Make sure to follow the correct polarity if connecting
the camera to DC power. Polarity is marked on the
power connector.
