39
Web Configuration
3.
Under
Max Disk Space
, enter the disk full percentage that will trigger an
alarm (e.g. a Disk Full Alarm will be triggered when the recording disk is
80% full).
4.
Check
Disk Error Alarm
to enable Disk Error Alarms.
5.
Click
OK
.
6.8.2 Motion Alarm
The Motion alarm page allows you to configure camera motion detection
alarm settings. You must enable motion detection to use local (e.g. microSD/
SD card or FTP recording) motion detection recording. For instructions on
setting up local recording, see “6.9 Local Record” on page
39. For details on
motion recording using Syncro-V, see the Syncro-V manual on CD.
To configure motion detection:
1.
Click
Alarm Configuration>Motion Alarm
.
2.
Check
Enable
under
Motion Parameter
.
3.
Click
Schedule
to configure a motion detection schedule. The Schedule
Time Setting menu opens.
NOTE:
If the Schedule Time Setting menu does not open, disable any popup
blockers.
