FLIR B6 series, Руководство пользователя

Страница: 143 / 326

20 Programming the camera
General You can program the camera to save images periodically.
Procedure Follow this procedure to make the camera save images periodically:
In the mode selector, select Program and push the joystick.
1
To select Setup , move the joystick up/down. 2
To display the Setup dialog box, select Setup and push the joystick. 3
To specify which camera to use, do the following:
1 Move the joystick up/down to select Camera .
2 Push the joystick.
3 To select the camera, move the joystick up/down.
4 To confirm, push the joystick.
4
To specify the time period between saves, do the following:
1 Move the joystick up/down to select Hours , Minutes and Seconds , re-
spectively.
2 For each parameter, push the joystick.
3 For each parameter, move the joystick up/down to set a value.
4 For each parameter, push the joystick to confirm.
5
To specify when periodic saves will stop, do the following:
1 Move the joystick up/down to select Stop .
2 Push the joystick.
3 To select
Manual , Counter or Timer , move the joystick up/down.
4 To confirm, push the button.
6
For each choice, specify control parameters. 7
To confirm and leave the dialog box, push the button.
8
To start the program, move the joystick up/down, select Start and push the
joystick.
9
Related topics
For location of buttons, see section 9 – Camera parts on page 21.
20
Publ. No. 1558550 Rev. a557 – ENGLISH (EN) – October 7, 2011
125