FLIR B6 series, Руководство пользователя

Страница: 161 / 326

22.3.8 Changing settings for the LCD display
General
When you open the LCD display the following takes place:
1 The display is automatically turned on.
2 The viewfinder is automatically turned off.
You can change this behavior by changing settings for the LCD display. In this dialog
box you can also change settings for LCD display intensity, viewfinder intensity and
video format.
Procedure Follow this procedure to change settings for the LCD display:
To go to the mode selector, push the button to the right of the joystick.
1
In the mode selector, select Setup and push the joystick.
2
In the toolbox, select Displays and push the joystick. 3
Do one of the following and push the joystick to confirm each choice:
■
To make the display automatically turn on and the viewfinder automati-
cally turn off when you open the display, select
Auto .
■
To turn on the display and override the previous behavior, select Display .
■
To turn on the viewfinder and override the previous behavior, select
Viewfinder .
■
To change LCD display intensity, select Display intensity , push the
joystick and then move the joystick up/down to select a different intensity.
■
To change viewfinder intensity, select Viewfinder intensity , push the
joystick and then move the joystick up/down to select a different intensity.
■
To change video format, select External video monitor , push the joystick
and then move the joystick up/down to select a different video format.
4
To confirm and leave the dialog box, push the button.
5
Related topics For locations of camera buttons, see section 9 – Camera parts on page 21.
22
Publ. No. 1558550 Rev. a557 – ENGLISH (EN) – October 7, 2011
143
22 – Changing settings