Accessing the CM-3102 via a Web Browser
56
Ariel CM-3102 User and Installation Guide
December 12, 2018
6.3.1.4.6 IP Filter
The
IP Filter
screen is used for restricting access to the camera by allowing or denying specific IP
addresses. It is possible to filter up to 10 IP addresses. The options are
Allow, Deny,
or
NONE
(default).
To allow an IP address
From the
Filter
drop-down list, select
Allow
.
Check the
Enable
checkbox for each IP address for which you want to allow access.
Enter the IP address in the
Address
text box.
Click
Save
.
To deny an IP address
From the
Filter
drop-down list, select
Deny.
Check the
Enable
checkbox for each IP address for which you want to deny access.
Enter the IP address in the
Address
text box.
Click
Save
.
6.3.1.4.7 DDNS
The DDNS (Dynamic DNS) screen is used for network access if you select PPPoE as the default
network connection. Before configuring the system to use DDNS, you must first register with a DDNS
service provider.
To use DDNS
From the
Enable
drop-down list, select ON. The default is
OFF
.
From the
Type
drop-down list, select the DDNS service provider:
DynDNS:
(default)
No-IP:
Two-DNS:
FreeDNS:
Enter the Host Name, User Name, and Password in the respective text box.
If you are using FreeDNS, the
Hash
text box also is displayed. Enter the Hash value, which is a
hash of your user name and password. It is available from
http://freedns.afraid.org.
Click
Save
.
www.
.com
1.800.561.8187
