Accessing the CM-3102 via a Web Browser
50
Ariel CM-3102 User and Installation Guide
December 12, 2018
IPv6 Default Router Address
If you are using IPv6, enter the IPv6 default router
address.
Subnet Prefix Length
If you are using IPv6, enter the subnet prefix length (1-128
digits) for the IPv6 Default Router Address.
IPv6 DNS
If you are using IPv6, enter the IPv6 DNS address.
To configure the Wire Setting
In the
Wire Setting
section, from the
Speed & Duplex
drop-down list, select one of the following:
10 Mbps Half Duplex
10 Mbps Full Duplex
100 Mbps Half Duplex
100 Mbps Full Duplex
Auto
(default setting)
To enable UPnP settings
In the
UPnP
section, from the
Enable UPnP
drop-down list, select
ON
. The default is
ON
. This
enables the camera to be detected by any unit on the LAN.
From the
Mode
drop-down list, select one of the following:
IP and Device Name
The camera connects to the UPnP server by using its
IP address and default device name. This is the default setting.
Device Name
The camera connects to the UPnP server by using the
default camera name.
User Input
The camera connects to the UPnP server by using a friendly
name. Enter the name in the
Friendly Name
text box that opens when this
option is selected:
To enable SSL
In the
SSL
section, from the
Enable SSL
drop-down list, select
ON
. The default is
OFF
.
Note:
You must install or generate an SSL certificate before enabling SSL.
6.3.1.4.2 FTP Server
The camera includes a built-in FTP server which enables
remote access to files of
events that are
captured in snapshots or recorded on clips and are stored on the
SD card. The
FTP
Server
uired by the user.
ftp://<camera IP
address>.
www.
.com
1.800.561.8187
