GARANT drag hose spreader
Start-up
Fliegl Agrartechnik GmbH, 84453 Mühldorf am Inn, Germany
23 of 77
5. Start-up
5.1 First-time start-up
-
All setting and adjusting tasks must be performed for first-time start-up.
-
Before starting work, the operator must familiarise himself with all
actuating devices and their function.
It is too late to do so once work has started.
-
Before every start-up, check the attachment for operational and
transport safety.
-
Before start-up, instruct persons to leave the danger area, e.g. around
hydraulic equipment, drives.
-
There is a risk of injury at crushing and shearing points in the area of
the: boom arms, connection between trailer and attachment.
-
Before starting up the attachment, ensure that there are no persons or
obstructions in the vicinity of the attachment.
-
Observe the safety instructions affixed to the attachment. An
explanation of the individual warning symbols is provided on page 15 of
these operating instructions.
-
Also comply with the instructions in the relevant sections and in the
appendix of these operating instructions.
5.2 Check before start-up
The points below will facilitate attachment start-up. For more detailed information, refer to the relevant
sections in the operating instructions. Check to ensure that all safety devices (covers, panels etc.) are in
proper condition and are applied to the attachment in protective position.
5.3 Returning to service
After an extended storage period, the same steps as for first time start-up must be completed. See
section 5.1.
