UMPIOXR400V2-7-1EN, 2012-07-01
45
10 Serial Output
These settings can be changed in
SPECIAL FUNCTION\SYSTEM SETTINGS\SERIAL TRANSMIS.
if an RS485
interface is used.
10.4 Format Settings of the Serial Output
Some format settings of the serial output can be edited in
SPECIAL FUNCTION\SYSTEM SETTINGS\
SERIAL TRANSMIS.
.
Press ENTER to confirm the menu item
PROTOCOL FOR SERIAL
OUTPUT
.
Select
DEFAULT
to display the default transmission parameters.
Select
SETUP
to change the transmission parameters. Press
ENTER.
The display contains three scroll lists:
•
BAUD
for the baud rate
•
PARITY
for the parity
•
ST
for the number of stop bits
If
ON
is selected, space characters will not be transmitted. The file
size will be considerably reduced (i.e. shorter transmission time).
Decimal marker to be used for floating point numbers (point or
comma).
Character to be used for separating columns (semicolon or tabula-
tor). The setting depends on the requirements of the PC program.
Note!
If the transmitter has an RS485 interface, no data can be sent via RS232.
P r o t o c o l f o r
S e r i a l o u t p u t
S e r i a l p r o t o c o l
d e f a u l t > S E T U P <
> B A U D < p a r i t y s t
2 4 0 0 E V E N 1
S E R : k i l l s p a c e s
o f f > O N <
S E R : d e c i m a l p o i n t
' . ' > ' , ' <
S E R : c o l - s e p a r a t .
' ; ' > ' T A B ' <
