Flexim FLUXUS F808 Скачать руководство пользователя страница 113 | Manualshive

Страница: 113 / 171

Flexim FLUXUS F808 Скачать руководство пользователя страница 113

12 Dismounting and disposal

FLUXUS F808

12.1 Dismounting

113

UMFLUXUS_F808V2-2EN, 2020-06-25

12.1

Dismounting

The dismounting is carried out in reverse order to its installation, see chapter 6.

12.2

Disposal

The measuring equipment has to be disposed in accordance to the applicable regulations.
Depending on the material, the corresponding parts have to be disposed in residual or special waste or recycled. For fur

-

ther information, contact FLEXIM.

Warning!

Touching live parts

Electric shock or arc faults can led to severe injuries. The measuring instrument can be damaged.
→ Prior to any work on the transmitter (e.g., installation, dismounting, connection, start-up), the transmit

-

ter has to be disconnected from the power supply.

Caution!

Safety and accident prevention regulations for electrical systems and equipment

Failure to observe these regulations may lead to severe injury or death.
→ Observe the safety and accident prevention regulations for electrical systems and equipment.

«
...
111
112
113
114
115
...
»

Содержание FLUXUS F808












































































































































































Отзывы:

Нет отзывов