Flexi AC Flexi ACiON 1000, Руководство оператора

Страница: 8 / 37

Technical Specification
4
Flexi ACiON Operator Handbook
Installation
Installation Information for Very Narrow Aisle
Floors
Strength: With such compact equipment it is inevitable that the wheel loadings will be high. The wheels are
normally fitted with super elastic rubber tyres. Wheel sizes are stated on a label mounted inside the overhead
guard.
Flatness:
The main areas measured are the working aisles themselves, but guidance is also given for free
movement areas.
The industry guidelines set out below are taken from the report No. 34 Appx. C by The Concrete Society; they
generally apply to guided VNA truck systems which normally do not have tilting lift masts and operate with aisle
operating clearances of 100mm to 150mm each side. The Flexi AC range does not have the same operating
restrictions as the lift mast can be tilted to overcome some degree of slope, the Flexi AC normally operates with a
minimum of 300mm aisle clearance on each side so floor flatness is not as critical as guided alternatives. Therefore
most Flexi AC installation have floors rated at category 2 or 3 depending on the lift height up to 13 metres.
Category For Use With Location
Superflat
VNA warehouses with min
clearance between fixed and moving
pallets: Max throughputs: Max truck
speed:
Max permitted racking
height.
Defined Movement
1
VNA warehouses where the racking
height varies between 8m and 13m.
Defined movement
2
VNA warehouses where the racking
height is less than 8m.
Defined movement
3 Narrow and wide aisle warehouses Free movement
Racking
Full details of the erection tolerances for narrow aisle racking may be found in Guideline No. 2 in the SEMA
publication - Erection tolerances for Static Racking.