Flexi AC Flexi ACiON 1000, Руководство оператора

Страница: 31 / 37

Maintenance
27
Flexi ACiON Operator Handbook
1. Drive truck to charging area
2. Lower forks and select Neutral
3. Turn Keyswitch to ‘O’
4. Operate Emergency Stop button (5)
5. Remove battery lid
6. Disconnect battery at connector (22/23)
7. Switch ‘ON’ the charger at the wall
connection (isolator)
8. Connect the charger lead (21) to the battery
connector (23) labelled ‘CHARGE’
9. The charging cycle will start automatically
(Hoppecke & Tebetron chargers)
10. After the FULL charge cycle (See truck
specification for cycle time) the charger will
switch off automatically (Tebetron chargers).
Hoppecke chargers should be switched
‘OFF’ at the front panel.
11. If it is necessary to terminate the charge
cycle BEFORE completion (not
recommended), switch off the charger by
pressing the switch labelled (Tebetron)
or RED button (Hoppecke) on the front panel
of the charger. Note: press once only, further
presses will recommence the charge cycle.
12. Switch ‘OFF’ at the isolator
13. Disconnect the charger from the battery
(labelled CHARGE)
14. Check that the top-up container is filled with
deionised water
15. Connect the water top-up bottle to the battery
using the quick release connector
16. Pressurise the top-up bottle using the hand pump
until water starts to flow into the cells.
NB: Do not overpressurise.
17. Alternatively use a manual method or electric
trolley to ‘top-up’ the cells such that the
electrolyte level touches the indicator inside the
cell.
18. Continue until ALL the cells show a green
indicator on the cap (Hoppecke)
19. Remove the top-up bottle via the quick
release coupling
20. Note: Ensure that cells are not overfilled.
21. Re-connect the battery to the truck via the
‘CHARGE’ connector
22. Reset the Emergency Stop Button.
23. The truck is now ready for use
Note : Suitable acid resistant protective clothing
(gloves and protective glasses) should be worn when
working with batteries
Note: For further details of charger display and
sequences - Consult the charger manual
Charging Procedure