Flexi AC Flexi ACiON 1000, Руководство оператора

Страница: 29 / 37

Maintenance
25
Flexi ACiON Operator Handbook
Battery Maintenance
Correct operation of the battery charger is important.
Follow the instructions of the charger manufacturer.
Never fully top up battery cells just before a charge
cycle. (Just check they are not ‘dry’)
Never permit the battery to discharge below the
minimum value given by the battery manufacturer.
Always use a battery charger approved by the
battery/truck manufacturer.
Only use deionised / distilled water to top up cells.
Never permit a battery to stay discharged for long
periods.
Always fully top up battery cells immediately after
charge cycle.
The truck uses a 48V DC battery, with various Amp-
Hour capacities to suit the truck’s duty cycle. Always
consult the truck’s technical specification before
attempting to fit or connect a battery to the truck’s
electrical system. It is also important to check the
charger specification to ensure that it is compatible
with the battery before charging. Read the charger
handbook before connecting.
Note: Battery chargers should only be installed by a
qualified electrician.
Battery Removal
•
Remove battery lid.
•
Disconnect Truck Connector (22) from Battery
Connection (23) under lid.
•
Lift seat pan.
•
Lift battery retaining latch.
•
Lift battery using a forklift truck of suitable
capacity
Note: Only lift battery approx. 20mm (3/4")
•
Withdraw battery from chassis.
•
Lower battery to floor.
•
Replacement is the reverse of the above
procedure.
When charging the battery in-situ, the Charger
Connection (21) must be connected to the Battery
Connection (23).
(See page 28).
CAUTION
Do not attempt to fit Charger Connection (21), to
the Truck Connection (22), or serious damage will
be done to the truck electronics.
When replacing the battery onto the truck, the battery
tank must be carried vertically and the truck
approached squarely. In order to ensure that the
battery tank is held securely by the battery latch,
push the battery firmly up to the bulkhead before
lowering. The battery latch will automatically lift and
then engage.
Note: For full details of the charging and
maintenance of the battery and operation and
maintenance of the battery charger see the separate
battery and charger handbooks.