Flexi AC Flexi ACiON 1000, Руководство оператора

Страница: 34 / 37

Optional Extras
30
Flexi ACiON Operator Handbook
Timotex Supaweigh XL
Supaweigh Function Keys
To switch on Supaweigh
To switch off Supaweigh
To zero current weight at weighing
position.
To tare off the weight of an empty
pallet/ container.
To enter a preset digital tare value.
To cancel a tare.
To identify the tare and zero values.
To freeze/ unfreeze the current
displayed weight.
To change manually the weighing
mode, e.g. from ---- to a weight.
To change the date and time (printer
model only).
Supervisory functions to program the
unit.
To toggle unit of measurement from
kg to lb.
To enter a product code for
subsequent loads (printer model
only).
To enter a target load for the current
totaliser.
To print out the current totaliser
memory and the period totals.
Adds current weight to total weight or
subtracts from target weight.
Transfers current weight and product
code to the printer store.
Confirms to the unit the data keyed
in either with the numeric or function
keys
Activates printer after PRINT has
been pressed
Resets total weight to zero or target
weight
to preset load value
Deletes incorrect numeric key entry
Clears printer memory (press within
15 seconds of end of printing).
SUPAWEIGH LIFT TRUCK SCALE - SINGLE
WEIGHT DISPLAY FOR ELECTRIC TRUCKS
Switch on truck. Raise fork carriage up and down 3
or 4 times to fill hydraulic cylinders and warm up
hydraulic oil. LOWER FORKS TO GROUND.
TO PREPARE THE SCALE
Switch on the display by pressing ON. If necessary,
press CLEAR to reset the totaliser on the top line.
The bottom line of the display should read + Gross
Wt: ---- kg. If it reads -, press TARGET, then 0, then
ENTER. If Nett, press TARE and 3.
TO ZERO DISPLAY (at start of day or shift and every
hour).
Start with empty pallet forks on the ground and
hydraulic pressure relaxed. The display should show
4 bars (---- kg). If not, press HOLD.
With mast vertical, smoothly raise the empty forks
and stop when the two horizontal marks (one on the
mast and one on the fork carriage) are exactly level.
As the forks lift you should hear a bleep. Press
ZERO and, when prompted, press ENTER. Wait a
second or so and the display should read 0. Lower
the forks and watch for the display to change to 4
bars (---- kg) as the magnet on the fork carriage
passes the switch on the mast.
TO WEIGH
Now pick up a load and raise the forks as described
above. The load weight is shown on the bottom line
of the display. Do not forget to press ENTER if you
wish to add the load to the totaliser on the top line.
The weighing procedure is now complete and the
truck is ready for normal handling duties.
TO OPERATE A TARE
If you know the tare weight press TARE, then 1, key
in the weight and press ENTER. Alternatively, weigh
an empty container on the forks, press TARE then 2.
TO CANCEL A TARE
Press TARE and 3.
TO ACCUMULATE A TOTAL WEIGHT FOR A
NUMBER OF LOADS
While the display shows the weight, press ENTER.
0
ZERO
O
TARE
CHECK
HOLD
DATE/
TIME
KG/LB
PROD
TARGET
TOTAL
(ENTER)
CLEAR