Flexi AC Flexi ACiON 1000, Руководство оператора

Страница: 17 / 37

Technical Description
13
Flexi ACiON Operator Handbook
Model Description
General
This Operator's Handbook is for The Narrow Aisle
Limited. Flexi ACiON Range .
The operation of the
Flexi ACiON Range is as
follows: A battery supplies power for the traction
motor, hydraulic pump motor, power steering pump
motor and the control panel and instruments. The
motors are controlled by an electronic control system.
Forward or reverse travel selection is controlled by
the Travel Direction Lever mounted to the right of the
operator. The Accelerator Pedal controls travel
speed.
The truck has an electronic braking system in
addition to service brakes.
The Service Brake Pedal applies the hydraulic
service brakes at the rear wheels and cuts power to
the traction motor. The Parking Brake is applied by a
lever situated to the right of the operator, this also
cuts power to traction when applied.
The truck is equipped with a multi function Display
screen (8).
Operator Protection Equipment
The Overhead Guard is intended to offer protection
to the operator from falling objects, but cannot protect
against every possible impact. Therefore, it must not
be considered a substitute for good judgement and
care when handling loads.
DO NOT REMOVE THE
OVERHEAD GUARD .
A Load Backrest Extension may be installed if
required on your machine.
Contact Narrow Aisle
Limited for details.
Controls
(Refer to Illustration on previous page).
Item 1 - Capacity Plate
The Capacity Plate is located to the right of the
driving position and states the truck designation,
rated and actual capacities at various lift heights and
load centres. Ensure that these safe loading
capacities are understood before handling any loads
and are not exceeded.
Item 2 - Seat
The operator's Seat has been chosen to minimise
fatigue and maximise comfort. Comprehensive
adjustment may be carried out to the seating
position. (Refer to illustration).
Item 2a - Seat Belt
A simple lap Seat Belt is provided for operator
protection. IT IS STRONGLY RECOMMENDED
THAT THE SEAT BELT BE WORN AT ALL TIMES.
Item 2b - Fore and Aft Adjustment
Pull this lever upwards to adjust the Fore and Aft
position of the Seat. Slide the Seat forwards or
backwards to the required position and release the
lever. Move the Seat slightly until the lever latches
into position. The Seat must be latched in position
before the truck is operated.
Item 2c - Seat Back Rake Angle
To adjust the Rake Angle of the Seat Back, pull the
handle upwards and slide the seat cushion forwards
or backwards until the required angle is achieved.
Release the lever to secure the Seat in position.
Item 2d - Operator Weight Adjustment
To adjust the Seat to suit the weight of the operator,
push down firmly on the handle until the correct
operator weight is indicated. If the indicated weight is
too great, press down firmly on the handle until it
reaches the end of travel and allow the handle to rise
to the required weight.
Item 3 - Armrest
The Armrest hinges up to give access to the storage
area beneath.
Item 4 - Steering Column Adjuster
The angle of the Steering Column may be adjusted to
suit the operator. Turn the adjusting lever
anticlockwise to release the column. Turn the lever
clockwise to lock. Once locked, the position of the
lever can be changed by depressing the button in the
centre and turning. The column must be locked in
position when driving.
Item 5 - Emergency Stop
This is sited at the right hand side of the steering
column support for ease of access and is connected
to the truck electrical system.
2c
2b
2a
2d