Flavor Burst FB 80-08, Руководство пользователя

Страница: 26 / 74

25
3. Brush and clean all exposed surfaces of the
Gear Cartridge with detergent water, then
rinse thoroughly. (See Figure 31.)
Figure 31
4. Brush and clean all exposed surfaces of the
Injector Head with detergent water, then
rinse thoroughly. Use a small brush to
ensure that the syrup orifices are clear of
any residual syrup. (See Figure 32.)
Figure 32
5. When the Drive Assembly Gear Box has
soaked for at least 5 minutes, brush and
clean all exposed surfaces and openings
with detergent water and rinse thoroughly.
The Suspension Bracket may be
disassembled for a more thorough cleaning
if necessary. (See Figure 33.)
Figure 33
NOTE:
UNDER NORMAL OPERATING
CONDITIONS, IT IS NOT ADVISORY TO
BRUSH OTHER AREAS INSIDE THE DRIVE
ASSEMBLY GEAR BOX. DOING SO MAY
CAUSE DAMAGE.
NOTE: DO NOT OPEN OR DISASSEMBLE
THE DRIVE ASSEMBLY GEAR BOX.
6. Place the Gear Box, Suspension Bracket,
Gear Cartridge, and Injector Head in
approved sanitizer solution and soak for at
least 1 minute. (See Figure 34.)
Figure 34
7. Remove each part from the sanitizer
solution. Place the items on a sanitary tray
to air dry. (See Figure 35.)
Figure 35
8. Spray the Syrup Line Manifold opening with
approved sanitizer solution. Allow it to
sanitize for at least 1 minute. (See
Figure 36.)
Figure 36