Flavor Burst FB 80-08, Руководство пользователя, Страница: 47 / 74

46
Installing the Spigot Switch Assembly
Figure 109
To activate the Flavor Burst
®
system, a switch
must be installed on the freezer draw-handle.
Every FB 80 system ships with a standard
Spigot Switch Assembly common to most
freezers with flat handle bars. (See Figure 109.)
Should your freezer have a round handle rod or
a handle of unusual size or shape, this standard
switch may not be suitable for your freezer
model. Contact your local distributor if the
Spigot Switch included with your unit does not
fit.
1. To install the standard Spigot Switch
assembly to a flat handle, simply clip the
Switch Bracket onto the handle and slide it
up the handle until the switch is within
grasping range. (See Figure 110.)
Figure 110
NOTE: IF YOUR UNIT INCLUDES AN
ALTERNATE SPIGOT SWITCH, REFER TO
INSTRUCTIONS INCLUDED WITH IT FOR
PROPER INSTALLATION.
NOTE : THE SPIGOT SWITCH INSTALLED
ON THE FREEZER SHOWN IN OTHER
SECTIONS THROUGHOUT THIS MANUAL IS
NOT THE STANDARD SPIGOT SWITCH
ASSEMBLY AND IS ONLY FOR USE WITH
THAT FREEZER OR SIMILAR MODELS. (See
Figure 111.)
Figure 111
Installing the Keypad and Keypad Mounting
Bracket
The Keypad is the control unit for the Flavor
Burst
®
system. Normal operating functions are
performed using the Keypad and the freezer
draw handle. The Keypad is attached to the
freezer with the Keypad Mounting Bracket.
1. Slide the Keypad onto the main Bracket
plate and assemble the two Bracket parts in
the style that will best suit your freezer and
daily operations. One example is given in
the figure below. (See Figure 112.)
Figure 112