TemplateA4_v20130506
7
4.2 Purpose and use of this manual
The following pages list the information, specifications, measures and technical data
that allow the relevant personnel to use this product safely and for the intended purpose.
Responsible persons or those engaged by them carrying out the required services must read this manual attentively and
understand it.
Such services include:
storage, transportation, installation, electrical installation, commissioning and re-starting, operation, maintenance, inspection,
repair and dismantling.
Where the product is to be used in plants/facilities which do not comply with harmonised European regulations and relevant
technical rules and guidelines of professional associations for this field of application, the present document is purely for
informative and reference purposes.
As this unit may be subject to unlimited inspection at all times, this manual must be kept in the immediate vicinity of the installed
unit, at least within the confines of the operations room.
4.3 Qualifications required, assumptions
All personnel must have the relevant qualifications to carry out the required services, and be physically and
psychologically capable. The area of responsibility, competence and supervision of personnel is the duty of the Operator.
Required service
Professional group example
Relevant qualifications example
Storage, transportation
Logistics, transport, warehousing
Transport and warehousing specialist
Assembly, disassembly, repairs, maintenance.
Re-commissioning after adding or changing
components. Inspection.
Installation and building services
HVAC specialist.
First commissioning of configured control unit
(generic), re-commissioning after power cut,
operation (work on the terminal and SPC control
unit)
People with operations room
clearance with knowledge gleaned
from this guide.
Electrical installation
Electrical engineering
Specialist in electrical engineering/
installation
Initial and re-inspection
of electrical systems
Qualified person (QP) with
certification in Electrical Engineering
Inspection before commissioning
and re-inspection
of pressure equipment
Installation and building services
engineering performed in the
context of technical inspection.
Qualified Person (QP)
4.4 Staff qualification
Operating instructions are transferred by Flamco representatives or others assigned by them during delivery negotiations or on
demand.
Training for the required services, installation, dismantling, commissioning, operation, inspection, maintenance and repair are part
of the training / further education for service engineers of the Flamco branch offices or named service contractors.
These training courses cover information on required installation conditions, but not their implementation.
On-site services include transportation, the preparation of an operations room with the requisite foundation engineering to
accommodate the system, and the requisite hydraulic and electrical connections, the electrical installation for the power source
of the expansion automat and installation of the signal leads for the IT equipment.
ENG