F1300N Rotary Table Operating Manual
Section 8: Maintenance and Periodic Inspection
Rev A, February 2018
© 2017 Fisnar Inc. l Website:
www.fisnar.com
l E-mail:
41
1
Check Cycles and Methods
1.1
General Consideration
It is essential to correctly and periodically inspect and maintain the rotary table to prevent
unexpected failures or malfunctions, thus ensuring safe operation and lengthening the
machine’s life.
The outside parts of the machine should be kept clean. Use vacuum cleaner or soft cloth to
clean the rotary table. Do not use compressed air or chemical products to clean the machine,
as they can damage the internal and external cables and other components of the unit.
1.2 Check Cycles and Points
The check cycles of the machine are classified in the following categories:
•
Daily check
•
Weekly check
•
Check after 3 months of operation
•
Check after 3 years of operation
These cycles are based on a daily 8 hours of operation.
The check points are as follows:
Check cycle
Check point -----------------------------------------------------------------------
Daily Weekly Every 3 months Every 3 years
Tilt or deviation of Cylinder
x
Status of cables and hoses
x
Appearance
x
Stability on the work bench
x
Motor running condition
x
Motions of drive cylinder
x
Unfastened / loose bolts and screws
x
Internal wires and connectors
x
Accuracy and precision
x
Overhaul
x
