F1300N Rotary Table Operating Manual
Section 3: Teaching Overview
Rev A, February 2018
© 2017 Fisnar Inc. l Website:
www.fisnar.com
l E-mail:
17
1
Teaching Overview
A program consists of a series of parameters stored in the main unit memory. Each parameter
is stored in a numbered program memory. The programs consist of motor rotation angle,
speed and control delays.
When the program is executed, the rotary table will actuate the Z axis drive cylinder to travel
to dispense position set mechanically during set up. When the cylinder reaches travel
distance the delay timers start and begin the parameter set dispense sequence.
The rotary table applications are for full circular dispensing applications. Being internal
gaskets or external gaskets on a rounded object. Or an application for a rounded dispense
less than a full circle.
