F1300N Rotary Table Operating Manual
Section 3: Teaching Overview
Rev A, February 2018
© 2017 Fisnar Inc. l Website:
www.fisnar.com
l E-mail:
18
2
Rotary Table Menu Summary
2.1 Production Screen
Below is a list of functions, which are found under the Production Screen:
Function
Description
Dispense Angle
Sets the parameter for the angle of rotation of the motor
during the dispense cycle
Tail Angle
Sets the parameter for the angle of rotation for after the
dispense angle is complete (no material is dispensed on this
angle)
Rotation Delay
This is a time in seconds to create a delay before beginning
the dispense angle rotation. This time starts once the drive
cylinder moves into place.
Dispense Delay
This is a time in seconds to create a delay before the start of
material dispense. This time starts once the drive cylinder
moves into place.
Rotation Speed
This is the speed of motor rotation during the dispense cycle.
Measured in RPM.
