Fisher-Rosemount 3095FT, Руководство пользователя

Страница: 60 / 184

Rosemount Model 3095FT HART Flow Transmitter
4-12
SAMPLE PROCEDURES
Bench Configuration
(Standard) This bench configuration procedure only outlines the major
configuration steps. Refer to the individual screen explanations for
additional information.
1. Establish communications (see Page 4-4).
2. Enter either the system administrator or a maintenance level
password.
3. (Optional) If a configuration file is already created, use Read
Configuration File to retrieve those configuration settings.
4. Fill out the Flow Parameters screen.
5. Fill out the Gas Properties screen.
6. Fill out the Audit Parameters screen.
7. Select logged variables using the Logged Variables screen.
8. (Optional) Select LCD variables if LCD meter ordered.
9. Save the Configuration File.
10. Place the transmitter into Off-line or On-line Maintenance.
11. Send the configuration to connected transmitter using Send Xmtr.
12. Set or verify the Real Time Clock.
13. Set the PV Default Values.
14. Set the Units.
15. (Optional) Change the multidrop address.
Bench Configuration
(Option Code C1) This bench configuration procedure only outlines the major
configuration steps when option code C1 is ordered. Refer to the
individual screen explanations for additional information.
1. Establish communications (see Page 4-4).
2. Enter either the system administrator or a maintenance level
password.
3. Read the current transmitter settings using Recv Xmtr.
4. Verify the Flow Parameters screen.
5. Verify the Gas Properties screen.
6. Verify the Audit Parameters screen.
7. Verify the Logged Variables.
8. (Optional) Verify the LCD variables if LCD meter ordered.
9. If any changes were made in steps 4 through 8, place the
transmitter into Off-line or On-line Maintenance, and send the
configuration to connected transmitter using Send Xmtr.
10. Verify the Real Time Clock.
11. Verify the PV Default Values.
12. Verify the Units.
13. (Optional) Verify the multidrop address.