12
Moving Images with Music and Nature Sounds!
¡Imágenes movibles con música y sonidos de la naturaleza!
Images mobiles avec musique et sons de la nature!
Swing Power/
Speed Switch
Columpio Interruptor
de encendido/
velocidad
Bouton de mise
en marche/vitesse
de la balançoire
Main Power Switch
Interruptor Principal
L’interrupteur Principal
Sound Power/
Volume Switch
Interruptor de
encendido de
sonido/volumen
Bouton sons/
volume
Projection
Switch
Interruptor del
proyector
Bouton de
projection
Music/Sound
Selection Switch
Música/Sonido
Interruptor de
selección
Bouton
de sélection
musique/sons
• Place your child in the seat and secure properly.
Hint:
You can slide the canopy back to get baby in and out of the
seat. Slide the canopy forward for projector use.
• Slide the
main power switch
ON . The LED light will turn on.
• Slide the
swing power/speed switch
ON
•
.
• Give the seat a light push to start the swinging motion. Adjust the
swing power/speed switch
to the desired swing motion setting.
Hints:
-
After turning on power, this product may not swing unless there
is a child in the seat.
-
As with most battery-powered swings, a heavier child will
reduce the amount of swinging motion on all settings. In most
cases, the low setting works best for a smaller child while the
high setting works best for a larger child.
- If the low setting provides too much swinging motion for your
child, try placing one end of a blanket underneath your child
and let the other end of the blanket drape down while swinging.
- If swinging stops while using a lower setting, try a higher
setting. Give the seat a light push to start the swinging
motion again.
• Slide the
sound power/volume switch
to ON with low volume ,
ON with high volume or OFF .
• Slide the
music/sound selection switch
to
or .
• Slide the
projection switch
ON or OFF .
• Be sure to turn this product off when not in use. Slide the
main
power switch, swing power/speed
and
sound power/volume
switches
OFF .
