Fisher & Paykel Titan aerotech OD301MUS Скачать руководство пользователя страница 22

-  22  -

3.7

 

Set Automatic / Delayed Time Cooking

·

  Check that the clock shows the correct time.

·

  Select upper or lower oven cavity by pressing UPPER / LOWER (for double ovens

only).

·

  Press the COOK TIME button.  ‘Cook Time’ and ‘Auto’ will flash and ‘00:00’ will show

in the oven display.  Turn the PRESS TO CLEAR knob to select the desired length of
cooking time (e.g. 2 hours).  The maximum cook time that can be selected is 23 hours
59 minutes.

·

  To set the time the oven is to turn off, press the STOP TIME button.  ‘Stop Time’ and

‘Auto’ will flash in the oven display.  Set the stop time by turning the PRESS TO
CLEAR button.

·

  Choose the cooking mode and temperature required.  These settings will

automatically be adopted after 8 seconds or you can press the STOP TIME button.

Each of the steps in setting Automatic / Delayed Time Cooking must be started within 8
seconds of the previous step being completed, otherwise the clock display will revert to
the time of day and the process will have to be started over again.

If there is time to wait before cooking starts, ‘Delay’ and ‘Auto’ will show in the clock
display along with the current time.  The oven mode and temperature displays will dim.

The oven mode and temperature dials will still function as in manual operation.  They can
be altered prior to or during cooking, and the oven can be manually turned off before the
set Cook Time has elapsed.

During cooking, ‘Auto’ and the remaining cook time will be shown in the clock display.
When the Cook Time is finished, the oven will beep and cooking will cease.  The
temperature and oven mode displays will dim and ‘Cook Time’ and ‘Auto’ will flash in the
clock display.  If the oven mode and temperature dials are turned to OFF, the oven will
revert to normal operation after 8 seconds.

The Automatic / Delayed Time function can be cancelled at any time by turning the
temperature and oven mode dials to OFF.  After 8 seconds the clock display will revert to
time of day.

Содержание Titan aerotech OD301MUS


































































Отзывы: