Fisher & Paykel Titan aerotech OD301MUS, Руководство по обслуживанию

Страница: 17 / 65

- 17 -
2.29 XY-Capacitor
Note: This Capacitor provides surge protection for the oven.
Voltage: 250 VAC
Class: X2Y2
Temp Range: -105 to 210
°
F (- 40 to 100
°
C)
2.30 Micro Switches
Note: There are three micro switches in the door lock assembly.
Voltage 12
VDC
2.31 Self-Clean Pyrolytic Cycle
Duration: 3hrs
Pyro Temp 925
°
F (500
°
C)
Heat-up time 50 minutes approx.
Holding time 100 minutes approx.
Cool-down time 30 minutes
The oven self-clean mode operates by heating the oven to a temperature of
approximately 925°F (500°C). This burns off and breaks down soil and grease deposits.
The ash residue that remains can simply be removed from the cool oven with a damp
cloth or sponge. The self-clean cycle normally takes about 3 hours.
Turning the oven mode dial until ‘Self Clean’ appears in the display, then selecting the
maximum temperature using the temperature dial starts the self-clean cycle. ‘000’ will
appear in the temperature display and this will change to
x
when the cycle begins.
In the clock display ‘Door Lock’ and ‘Clean’ will show. The door lock will automatically
activate once the clean mode and temperature have been selected and in the clock
display the countdown of minutes remaining in the self-clean cycle will be shown.
During the self-clean cycle, the Broil / Grill inner element, the throat element and the
smoke eliminator elements are on. Additionally, during the first 15 seconds of each
minute the base element is on, and during the third 15 seconds of each minute the Broil /
Grill outer element is on.
The exhaust fan for the oven being cleaned will be on during the self-clean mode, while
the cooling fan for that oven will be on high speed. The cooling fan for the other oven (in
a dual oven model) will be on low speed.
During the self-clean operation in a dual oven model, the oven not being cleaned cannot
be operated in any mode.
The oven heats to its cleaning temperature of 930°F (500°C) and maintains this
temperature until approximately 2½ hours into the cycle. The elements then turn off and
the cool down period commences. When the temperature reduces to 356°F (180°C) the
door will unlock and the ‘Door Lock’ display will disappear from the clock display. When
the self-clean cycle has finished, ‘Clean’ and ‘00:00’ will flash in the clock display until it is