The Panda Generator
Page 44 Panda_AGT-DC_5000_12V_s01285_Operation manual.R03 - Chapter 4: The Panda Generator
22.3.11
Stop solenoid for engine stop
Some model are additional equipped with
an stop solenoid. The generator is stop-
ped by the co-operation of the stop sole-
noid immediately after switching off. The
adjustment of the stop solenoid must
always be checked, in order to be sure
that the stop lever can move also during
the operation freely and is not under pre-
stressing.
Fig. 4.3.3-7: Stop solenoid
4.3.4 Components of combustion air
Air suction openings at the sound
cover
The sound cover is provided at the upper
surface with drillings, through which the
combustion air can influx.
It must be consistently paid attention that
the generator is installed in such a way
that from no water can arrive into the pro-
ximity of these air openings. (minimum
distance 150 mm)
Fig. 4.3.4-1: Combustion air intake
Cooling air for coil cooling
The sound cover upper surface is provi-
ded at back side with drillings, through
which the cooling air can influx.
It must be consistently paid attention that
the generator is installed in such a way
that from no water can arrive into the pro-
ximity of these air openings.
Fig. 4.3.4-2: Cooling ait intake
