The Panda Generator
22.3.11
Panda_AGT-DC_5000_12V_s01285_Operation manual.R03 - Chapter 4: The Panda Generator Page 41
Ventilation screw thermostat housing
The ventilation screw on the thermostat
housing should occasionally be opened
for control purposes. Standing machinery
should principally carry out ventilating.
Fig. 4.3.2-9: Ventilation screw thermostat housing
Water-cooled exhaust elbow
The manifold is cooled by means of the
internal cooling system (freshwater). The
cooling water filler necks on the casing of
the elbow may not be opened. These
cooling water necks are only required to
fill the motor with cooling water in cases of
repair. The normal cooling water controls
may only be carried out at the external
expansion tank.
Fig. 4.3.2-10: Water-cooled exhaust elbow
