First Class Peripherals Sider D4, Инструкция по установке и эксплуатации

Страница: 87 / 138

erased.) After this first find, subsequent ^F
commands find further instances of the find
character in the buffer. ‘Ibis mode can be can-
celled with the RETURN key. If the [Control-
F] key is issued when the cursor is in the ascii
portion of the display then an ascii find charac-
ter will be gathered. (High bit of the find
character will be off unless Open Apple is
pressed when the character is typed.)
Control S The (Control-S) k e y selects g l o b a l s e a r c h
^S mode. When used the first time this brings up
a request to input a search string. If the string
you give begins with “$“ then it will be taken
as a hex string for the search. If FOLLOW
mode is in effect then only the followed file
will be searched for the string, otherwise the
entire disk, from the present position, will be
searched. The ascii search is not sensitive to
the high bit of characters, nor is it case sensi-
tive. (Thus, for example, a search siring of
Junk will find both “JUNK” and “junk”.) You
can cancel a search in progress with the ESC
key while the disk is reading, or during input
of the search string. (On the Ultraterm version,
use (Control-C) for the latter.)
Strings that cross block boundaries can be lo-
cated with this option. The program will beep
when a string is found. When found, press ^S
in the EDiT mode to continue searching. You
can cancel by pressing RETURN in EDIT
mode. Searching for the same string can be re-
started by typing another [Control-S] in EDIT
mode and pressing RETURN when the default
string is shown.
If the volume name at the top of the screen, is “I?" this means the
program encountered an error determining the name. This India-
cats there is something wrong with block 2 (the first block
shown). It could also mean, the disk is not a ProDOS disk.
AUXILIARY PROGRAMS 7 9