First Class Peripherals Sider D4, Инструкция по установке и эксплуатации

Страница: 23 / 138

7. Enter ‘F’ for Fix when prompted to do so. This will cause
the program to attempt to correct any format problems
which might have occurred during shipment.
8. The output slot lets you choose whether the test information
will be sent to your screen or printer. Select 3 to display to
the screen.
9. As MR.FIXIT works, you will notice a block counter in the
upper right hand corner of the screen indicating which block
is being tested. The Sider D4 has two volumes of 39,072
blocks each. The counter will increment until it reaches that
figure.
10. When the test completes, you will be prompted whether you
want to run MR.FIXIT again. Enter a 'Y"
11. Run MR.FIXIT a second time to check the second ProDOS
volume on the Sider. All of the inputs will be the same as
before except when prompted for a drive number you should
enter a ‘2’ not a ‘1.’
After the second pass finishes enter a ‘N’ to exit the program
and return to the ProSel program selector menu. The drive
is now ready for use. We recommend you proceed to the
SiderFile section of this manual to learn about some of the
unique features of the Sider’s software.
SOFTWARE OVERVIEW 1 5