First Class Peripherals Sider D4, Инструкция по установке и эксплуатации

Страница: 72 / 138

4.4 ADDITIONAL CAPABILITIES
4.4.1 DIsplaying Flies I Volumes
From the program selector menu, typing “1” or “2” will list the
SYS and DIR files in the root directories of drive I and 2 respec-
tively. Using the arrow keys/mouse you can run a listed
program, or press ESC to return to the program selector menu.
Subdirectories are listed in lower case; selecting one will read
the SYS/DIR ifies in that sub-directory.
Typing a 3,4, 5,6 or 7 key followed by “1” or ‘2” will cause the
device in the slot indicated and the volume 1 or 2 to be selected.
For example, if you press “6” then “1”, the disk in slot 6, drive 1
will be read and its SYS/DIR files displayed. If you have drives
in slots 1 or 2, the keys “8” and “9” are translated to slots 1 & 2.
4.4.2 Screen Saver Function
If the program selector menu has been on the screen for more
than 15 minutes with no activity, ProSel will cause the screen to
blank. Any keypress will bring it back. To change the default
from 15 minutes, see section 4.1 under option 2.
4.4.3 Using ProSel On Multiple Volumes
If you use 800K drives, you should copy the program selector to
each of your 3.5 disks so that as you change disks each new
volume will have the menu system on it. The menu is small
enough to make this possible. When running the menu from a
floppy, each time you change diskettes, simply type “51” to read
in the new volume information. (assuming the disk is in slot 5,
drive 1). When the list of files is displayed highlight and select
the PROSEL.SYSTEM. and press return.
64
ADDITIONAL CAPABILITIES