First Class Peripherals Sider D4, Инструкция по установке и эксплуатации

Страница: 27 / 138

If you choose to use a slot other than seven, perform the same
procedure changing the slot number to the one you selected.
With the slot assignment indicating ‘YOUR CARD” press
the return key to save the information and return to the sys-
tem menu.
If you have questions about using the control panel or the
other options available in it, refer to your Apple Owner’s
Guide for more information or contact your Apple dealer’s
service staff.
3a. With the system menu still displayed, place your COPY of
the Sider utilities into floppy drive I. Select “QUIT” from
the CONTROL PANEL which will cause the system to boot
from the Sider diskette.
3b. When the Sider software is booted, the screen will display
the Sider welcome message and be waiting for your instruc-
tions to continue.
End of Special APPLE IIGS Instructions
At this point, skip past the instructions for the Apple lle and
proceed to the instruction labeled 4.
A P P L E / / e I n s t a l l a t i o n I n s t r u c t i o n s
1. Place the 5-1/4 Sider Utility diskette in floppy drive I and
turn on the power to your Apple //e and Sider.
2. The floppy drive should load and the Sider installation
software; if it does proceed to instruction 4. The first time
you startup the Apple lle with the Sider attached, the com-
puter may try and boot off the uninitialized Sider which will
cause the Apple to hang.
SOFTWARE OVERVIEW 19