First Class Peripherals Sider D4, Инструкция по установке и эксплуатации

Страница: 80 / 138

The program will ask for a slot and drive number of the volume
to be optimize. It will then read and display the volume name of
the selected device and pause for an input.
FIG. 5-2 BEACHCOMBER INPUT SCREEN
The time needed to complete the operation depends on the
amount of data on the drive. The actual time can range from a
minute to more than an hour. About 5 to 12 minutes per
megabyte is typical for the first run. Later runs may take much
less, depending on what areas of the disk have been changed and
how extensive the changes were. If you absolutely must abort
the program, you can use the escape key. The program will take
a few moments to react to this key because it will only quit at a
time when the disk is “clean”, and must also do some last mo-
ment writing to disk at this point If you later want to continue,
7 2 BEACH COMBER