First Class Peripherals Sider D4, Инструкция по установке и эксплуатации

Страница: 76 / 138

The backup disks MUST BE ProDOS formatted before starting
the BACKUP program. When formatting these floppies use
volume names like BACKUP.01, BACKUP.02, etc. If you use
disks with other volume names, the program will ask if you want
to destroy the existing volume, and rename the volume.
The backup program will use both floppy drives alternately, un-
less you specify only one is to be used. The BACKUP screen
looks like this:
FIG. 5-1 BACKUP SCREEN
When you run the BACKUP program, you will be prompted to
enter the Original Slot and Drive. This should be the slot and
drive of the device being backed up. The program will read the
volume name from the specified device and display it (example:
/HARD1). Next, specify the destination slot and drive. The
Program can use both floppy drives; simple enter the assignment
of the first. Select whether to use the single drive option or to
have the floppies alternate. (alternate default
=
Yes).
The backup procedure will start as soon as you answer this ques-
tion. The first backup disk should be in the specified drive.
While this first diskette is being backed up. insert the second dis-
kette into the alternate drive, and soon. The total number of dis-
kettes required is shown as “Number needed xx”.
If the disk you have inserted is not named properly (i.e. BACK-
UP.xx) the process will pause and ask if you want to overwrite
the existing volume. The diskette will be renamed and the back-
up process will then continue. You can choose to abort the back-
6 8 BACKUP