First Class Peripherals Sider D4, Инструкция по установке и эксплуатации

Страница: 86 / 138

$29,2A of block 2). The printing of a list can
be aborted by hitting the ESC key. The list will
include some blocks that are not really index
blocks, mostly partially full blocks at the ends
of files.
[/] Flip is used to toggle between the two data
blocks in memory.
5 . 3 . 2 Edit Mode
In edit mode the arrow keys move the cursor (shown in inverse).
Any key other than a control character will be regarded as a
change to the editing buffer. (In hex mode, it is disregarded if
not a valid hex digit.)
ESC The ESC key returns to R/W mode.
Control X The (Control-X) key cancels any c h a n g e s y o u
^X may have made on the current block. (This is
done by rereading the block.)
TAB
The TAB key toggles between hex and ascii
editing modes. You can tell what the current
mode is by seeing where the cursor is placed.
In ascii editing mode, the high bit of a typed
character will be off unless you press the Open
Apple key at the same time, in which case the
high bit will be on. Control characters can be
inserted into the buffer only in hex editing
mode.
Control F The (Co n t r o l - F ) key is a lead-in to character
^F find mode. If the cursor is in the hex portion
of the screen then the cursor will disappear and
you are expected to type two hex digits. (An
invalid digit causes this mode to be canceled.)
The resulting byte then becomes the “find
character” and the next occurrence of it in the
buffer will be found and the cursor moved
there. (If none exists the cursor returns to the
first byte and the “Find mode” message is
BLOCK WARDEN