Firich Enterprise Gladius Smart FH-5251, Руководство пользователя

Страница: 18 / 52

Cash Drawer Installation
Before connecting the cash drawer to the GLADIUS SMART, please make sure the drive voltage
and cable pin assignment of the cash drawer matches the definition of the cash drawer port of
GLADIUS SMART.
For programmers, please refer to the folder “Utility” “Cash Drawer” in the driver DVD, where
you may find the test programs and DLL Library files for your application.
Plug cash drawer cable into cash drawer port.
Note: If the cash drawer cannot be detected by the system, please refer to troubleshooting.
Up to two cash drawers may be driven from this port. Driving voltage of the solenoid is
DC+12V. I/O port 284 is used for drawer operation. A test program is supplied, for Linux and
Windows, source code of which is available on request by software developers.
Value Description
0x284 Output address.
0x284 read 8bit Bit 2 => 0: low 1: high
0x200 Sleep 200ms
0x01 Open cashdrawer1 value.
0x02 Open cashdrawer2 value.
0x04 Close cash-drawer value.
0x04 Cash-drawer status mask.
COM5COM3