Before you permanently install
7
Antenna connectors
The next picture shows the Radio 1 side panel with its three antenna connectors,
which are numbered top to bottom, 1, 2, and 3. The other side has three
connectors for the second radio.
Note.
For antenna connectors that you do not intend to use, you need to install
50 Ohm terminators (not included).
Radio 1
Antenna connector 1
Antenna connector 2
Antenna connector 3
Test before you install
You should set up and test the mesh nodes indoors on a table before you install
them in permanent locations.
The benefits of tests before you install include:
•
Make sure all of the equipment works before you install it
•
Consistent settings across mesh nodes to reduce software configuration
errors in the field
•
Test bandwidth and make sure that the radios work
Types of tests to do:
•
Power on each device
•
Test the reset button
•
Attach all antennas and make sure you can see all devices in HotView Pro
software
•
Data and other application throughput tests
