Before you permanently install
9
5.
Single-click to start the Quick Launch feature of HotView Pro, which opens
the server and client software at the same time.
6.
Login with the correct user name and password. The default user name is
hv_admin; and the default password is firetide.
The system initializes.
7.
Go to
Mesh > Add Mesh >
login with the default user name and password.
8.
Make sure that all of the mesh nodes are visible in HotView Pro.
If you cannot see any or all of the mesh nodes, see the troubleshooting
information in the
HotView Pro Product Configuration Guide
.
9.
Set the country code for each node to change the device from a low-power,
low range setting to a correct full-power operational mode.
Caution:
Click
Set Later
if you put the nodes close together for staging.
Caution:
Make sure you configure the device for the correct country. If
you do not configure the country correctly, the device might operate in a
manner that is not legal or create problems with other wireless devices.
!
!
