Before you permanently install
5
Parts of a HotPort 5020-M mesh node
The next picture shows the HotPort 5020-M mesh node. The LEDs are visible at
the top of the node when it is oriented correctly for installation on a pole. Radio
1 is on the left side and Radio 2 is on the right side of the mesh node.
Radio 1 and Radio 2 LED
Radio 1
Connector 1
Connector 2
Connector 3
Power LED
Radio 2
Connector 1
Connector 2
Connector 3
The next picture shows the connectors on the bottom panel of a HotPort 5020-M
mesh node.
Rubber cap on
antenna connector
Port
DC power
Reset button
(behind the valve)
Ground screw
Weatherproof caps protect the connectors on the bottom panel. Rubber caps
cover the antenna connectors.
Caution!
Do not use the rubber caps outdoors. You must use 50 ohm
terminators or weatherproof antenna connections on all antenna
connectors. Damage from incorrect deployment is not covered by the
product warranty.
!
