3
Before you permanently install
Before you install a HotPort 5020-M mesh node in a permanent location, you
need to make sure that you have the correct and operational components.
Preparing what you need to install
To make sure you have everything you need to set up the mesh node:
1.
Open the box.
2.
Remove the contents.
3.
Check the contents for damage.
4.
Check the contents against the box contents list. See “Box contents for a
HotPort 5020-M mesh node” on page 4.
If a part is missing or damaged, call your Firetide reseller.
5.
If the contents are good and correct, keep the box for future use.
