Fire-Lite SENSISCAN 2000 Скачать руководство пользователя страница 12

Страница: 12 / 74

S2000 15017 Rev H 10/08/96 P/N 15017:H

MP-1F Module Dress Panel

F-ELR

The

F-ELR Resistor Assortment

is required for use in Canada. It includes a variety of ELR

values for supervising IZ or IC circuits. The desired resistor mounts to a single ELR plate (illus-

trated).

Included with the F-ELR:

47K, 27K, 10K, 6.8K, 4.7K, 2.2K, 1.8K, 470 and 120 ohm resistors.

2.4

QUIPMENT

FOR

THE

ENSISCAN

2000

CHS-4F

The CHS-4F expansion chassis package is required for all CAB-B3F installa-

tions. The CHS-4F includes the CHS-4 Chassis, the MP-1F Module Dress

Panel (illustrated), and an Expander Ribbon Cable.

AFM-16ATX

AFM-16ATX

The AFM-16ATX Annunciator Control Module contains 16 red alarm and 16 yellow trouble LEDs, 16 momentary touch-

pad switches for controlling each point, a system trouble LED, an ON LINE/POWER LED, and a local piezo sounder with

a silence/acknowledge switch for audible indication of alarm and trouble conditions at each annunciator. The

AEM-16ATF

Annunciator Expander Module

expands the AFM-16ATX by 16 system points. One to three of these expander modules

can be supported by an AFM-16ATX to a maximum of 64 system points.

AFM-32AX

The AFM-32AX Annunciator Control Module contains 32 red alarm LEDs, a System Trouble LED,

an ON LINE/POWER LED, and a local piezo sounder with a silence/acknowledge switch for au-

dible indication of alarm and trouble conditions at each annunciator. The

AEM-32ATF Expander

Module

expands the AFM-32AX by 32 system points. One expander module can be supported by

an AFM-32AX, providing a maximum of 64 points.

AFM-16ATF

The AFM-16ATF

Annunciator Fixed Module

contains 16 red alarm and 16 yellow trouble LEDs,

16 momentary touch-pad switches, a system trouble LED, an ON LINE/POWER LED, and a local

piezo sounder with a silence/acknowledge switch for audible indication of alarm and trouble condi-

tions at each annunciator. Only One annunciator may be used in a system.

AFM-32AF

The AFM-32AF

Annunciator Fixed Module

contains 32 red alarm LEDs, a System Trouble LED,

an ON LINE/POWER LED, and a local piezo sounder with a Local Silence/Acknowledge switch

for audible indication of alarm and trouble conditions. Only one annunciator may be used in a

system.

AFM-16AF

The

AFM-16AF Fixed Annunciator module

is intended for use in systems that require 16 alarm annunciator points or less.

Only one annunciator may be used in a system.

Содержание SENSISCAN 2000











































































Результаты поиска

Содержание SENSISCAN 2000

Отзывы:

Похожие инструкции для SENSISCAN 2000

Бренды по названию

Популярные бренды

Fire-Lite SENSISCAN 2000, Руководство по установке, эксплуатации и программированию

Результаты поиска

Содержание SENSISCAN 2000

Отзывы:

Похожие инструкции для SENSISCAN 2000

Бренды по названию

Популярные бренды