manualshive.com logo in svg

Fire-Lite Alarms MS-5024, Описание продукта

Поделиться
Скачать
Fire-Lite Alarms MS-5024 Скачать руководство пользователя страница 14

Digital Communicator

14

                                                                  Document #50066     Rev.D2     12/03/02     P/N 50066:D2

1.3.3 Notification Appliance Circuits

Two NACs (Notification Appliance Circuits) configurable for Style Y (Class B) with various programmable features.

1.3.4 Relays

Two dry Form-C relay contacts programmable for Alarm, Trouble, Supervisory and/or Communications Failure.  
Contacts are rated 2 amps @ 30 VDC (resistive) and 0.5 amps @ 30 VAC (resistive).

1.4

Digital Communicator

Two modular phone jacks allow easy connection to telephone lines.  Modular jacks are labeled PH1 and PH2 for the 
Primary and Secondary phone lines.  Telephone line active red LEDs are provided as well as a green 'Kissoff” LED.  
The integral digital communicator provides the following functions:

• Line Seizure - takes control of the phone lines, disconnecting any premises phones

• Off/On Hook - perform on and off-hook status to the phone lines

• Listen for dial tone - 440 hertz tone typical in most networks

• Dialing the Central Station(s) number - default is Touch-Tone

®

, programmable to rotary

• For tone burst or touchtone type formats: discern proper 'Ack' and 'Kissoff' tone(s) - the frequency and time 

duration of the tone(s) vary with the transmission format.  The control panel will adjust accordingly

• Communicate in the following formats:

✓

12 Tone Burst Types: 20 pps
(3+1, 4+1 and 4+2 Standard, 3+1 Expanded, 4+1 Expanded, 4+2 Expanded)

✓

2 Touchtone Types:
4+1 Ademco Express and 4+2 Ademco Express

Refer to Table 4-3, “Compatible UL Listed Receivers,” on page 56 for a list of compatible receivers.

1.5

Components

1.5.1 Main Circuit Board

The main circuit board contains the system’s CPU, power supply, other primary components and wiring interface 
connectors.  Optional modules plug in and are mounted to the main circuit board.  The main circuit board is delivered 
premounted in the cabinet.

1.5.2 Cabinet

The cabinet is red with an attractive navy blue front overlay.  The backbox measures 14.5" (36.83 cm) X 12.5" (31.75 
cm) X 2.875" (7.303 cm) and provides space for two batteries (up to 7 Amp Hour).  Also available is an optional 
dress panel (DP-5024), which mounts inside the cabinet.

1.5.3 Transformer Assembly

One 100 VA transformer is provided standard with the panel.

Содержание MS-5024

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды