3
ENU
2
Do never exceed the maximum valid operation
pressure of 6 bars. Always work with the chamber lid
closed wearing suitable eye, hand and face protec -
tion. Do never blast on uncovered skin areas.
Operate the fine blasting unit only with a suitable
extraction as well as suitable eye and mouth protec -
tion. The mode of extraction has to be adjusted to
the dusts generated during sand blasting. You
will find respective information in Standard
EN60335-2-69 and through the authorities in charge.
Replace worn or broken blasting hoses immediately.
The unit may only be operated by instructed profes-
sional personnel.
Use only high-quality, dry and clean blasting agents.
Use the blasting agent only once. Use blasting
agents in accordance with the installed nozzles.
Blasting agent that is moist or too coarse might lead
to clogging of the unit.
The unit may only be connected to a grounded
socket. Disconnect the unit from compressed air
supply and from the mains for all maintenance and
cleaning. For work inside the blasting chamber
always wear protective eyewear. Use only genuine
spare parts. The blasting tanks must not be inscri-
bed or labelled.
3. Fields of Application
The FINO SARIUS Fine Blasting Unit is suitable for
the sand blasting of all objects processed in dental
technology. Depending on the blasting agent used it
is suitable for the removal of investment materials
and for the roughening or polishing of surfaces. Due
to the direct-stop function the FINO SARIUS Fine
Blasting Unit is particularly efficient and economical
regarding the consumption of blasting agent.
Advantages:
• Can be supplemented to four blasting tanks
• Silicone-coated pane of blasting chamber
• Direct-stop function
1. Safety precautions
1.1 Marking of informatio
2. Safety Precautions
Attention!
The non-observance of these safety precautions
might lead to injuries of the operator and third
parties, which might be present and the unit might
be damaged.
The unit may only be used for indications described
in the fields of application!
If not used according to specifications there might
be the risk of eye or skin injuries.
The unit has been designed for indoor operation up
to a height of 2.000 m above sea level and an
ambient temperature of 5°C-40°C.
Before you start operating the unit
it is positively necessary to read
the user information carefully and
to store it closely at hand.
This symbol marks safety informa-
tion whose non-observance may
cause hazards to persons.
This symbol marks safety informa-
tion, whose non-observance may
cause hazards for the unit and its
function.
This symbol marks tips or informa-
tion, which may facilitate your
work and ensure a safe operation.
Version 1/2013. Read the User Manual prior to commencing work!
1. Safety precautions 3
• Marking of information
2. Safety Precautions 3
3. Fields of Application 3
4. Processing Instructions 4
• Getting started • Place of installation • Application of protective foil on the pane
of blasting chamber • Connection of the fine blasting unit • Filling of blasting tanks
• Blasting • Installation of supplementary tank
5. Maintenance and cleaning 5
• Exchange of tube • Exchange of air filter in the blasting tank • Exchange of blasting nozzles
• Exchange of pane of blasting chamber • Exchange of unit fuse
6. Troubleshooting 6
7. Storage 7
8. Technical Data 7
9. Delivery Forms 7
• Accessories
10. Guarantee 7
11. Disposal 7
• Registration Number
TABLE OF CONTENTS
