Fimer PVS-100-TL B2 Скачать руководство пользователя страница 38

Страница: 38 / 136

3.10 Functionality and components description

3.10.1 Highlights

• 6 independent MPPT for SX, SX2, SY, SY2 models; 2 independent MPPT (parallelable) for Standard and S2 models

• Two box configuration, separate power module and wiring box

• Transformerless inverter

• Maximum efficiency up to 98.9%.

• Double stage topology for a wide input range

• Large set of specific grid codes available which can be selected directly in the field

• Both vertical and horizontal installation

• 2 available sizes, 100 and 120 kW with 400 and 480 Vac of output voltage, respectively

• Wireless access to integrated Web User Interfaces

• Fimer Installer for Solar Inverters APP for commissioning of inverters

• Ethernet daisy chain enabled (supports both ethernet star/ring topology)

• One RS485 line acting as master or slave

• Modbus TPC/RTU Sunspec compliant

• Support to Fimer accessories directly connected to the inverter via RS485

• Remote monitoring and firmware update via Aurora Vision

(logger free)

3.10.2 Improved commissioning and maintenance

Fimer Installer for Solar Inverters APP

Improved multi inverter installation with Fimer Installer for Solar Inverters APP by using Android mobile devices (the app for iOS mobile

devices will be implemented soon).

Integrated Web User Interface

The inverter is equipped with an ethernet and wireless (IEEE802.11 b/g/n) board and with an Integrated Web User Interface that allow a

full access to all main configuration and parameters of the inverter. It can be accessed from any ethernet or wireless capable device like

laptop, tablet or smartphone via a common internet browser.

Remote firmware update function

The inverter firmware can be updated remotely using the Integrated Web User Interface dedicated section (

“SERVICE TOOLS menu”

)

or via Aurora Vision

or via Fimer Installer for Solar Inverters APP.

3.10.3 Aurora Vision Plant Management Platform

Integrated logging capability allows remote monitoring of the plant without the needs of any additional external loggers.

Aurora Vision is a cloud based platform enabling remote monitoring and asset management of Fimer devices in range of solar power

application.

Aurora Vision consists of different products:

•

Plant Portfolio Manager

is a full featured web based application used by solar power professionals to monitor and manage a portfolio

of solar power plants using Fimer inverters.

•

Plant Viewer

is an easy to use web based serviced application used by non-solar power professionals (such as homeowners or small

business owners) to monitor solar power plants they own.

•

Plant Viewer for Mobile

is the mobile version of Plant Viewer enabling non-solar power professionals to remotely monitor their own PV

plants by using smart phones, tablets and iPod Touch with IOS and Android operating systems.

•

Fimer Energy Viewer

is an easy to use mobile application allowing solar plant owners to remotely monitor all the energy flows and the

performance of their own solar power plants, with and without an energy storage system installed.

All products previously mentioned work together to allow solar power professional and site owners to collaboratively manage solar power

plants.

Содержание PVS-100-TL B2









































































































































Результаты поиска

Содержание PVS-100-TL B2

Отзывы:

Бренды по названию

Популярные бренды

Fimer PVS-100-TL B2, Руководство по эксплуатации продукта

Результаты поиска

Содержание PVS-100-TL B2

Отзывы:

Бренды по названию

Популярные бренды