22
b. Scale
displays “
≡ n
”.
M+
Indicator
appears to indicate that memory
contains stored data. “
≡ n
”” means the total number of transactions
accumulated to memory,
c. Scale returns to normal display status after 2 seconds,
d. Repeat
a
to
c
for subsequent transactions
15
,
Note: -
1. Unstable weight will not be accumulated. If
M+
is pressed when
weight reading is not unstable, scale will reject this command and
response with 3 beeps.
6.5.2 Memory Recall and Clearance
a. Press
[MR]
to recall total accumulated weight from memory,
After
[MR]
is pressed,
Mr Indicator
appears to indicate the total
accumulated weight value is displayed. At the same time, instrument
dis
plays “
≡ n”
(
n
means the number of transactions accumulated)
follow by the total accumulated weight stored in memory,
b. At this point: -
Press
[Zero]
to quit, or
Press
[MR]
again to clear memory then press
[Zero]
to quit to
operation mode. After that, both
MR
and
M+ Indicator
disappear to
indicate no data is stored in memory.
6.6 Piece Count Function
16
This instrument is equipped piece count function. Follow the below steps to
enter
Piece Count Function: -
a. Refer to
6.3
on how to select the desired weight unit,
b. If a container is used, place it onto the platform and press
[Tare]
,
c. Press
[Func]
until
(CoUnt)
appears,
d. Press
[Print]
to enter,
e. Default
17
sample size appears.
f.
Refer to
6.7
for subsequent operation procedures.
15
Weight must return to or below zero to enable another weight accumulation.
16
Piece Count Function Mode does not support memory accumulation (M+) function.
17
Default sample size value = 50 pieces
