23
6.7 Sampling Process
a. Put samples with same quantity on platform then press
[Print]
. Should
a different sample size is required, enter the quantity of the sample
size
18
through
[M+]
,
[Unit]
and
[Func]
keys,
b. Apply samples with the same quantity as being displayed on scale
19
and press
[Print]
,
c. Scale will calculate, store the average piece weight and confirm with 2
beeps. The quantity applied to platform is then displayed,
d. Sampling process is now completed.
Add to or remove from the platform, the corresponding quantity will be
displayed automatically.
Note: -
To count different articles, press
[Func]
and repeat procedures
listed on
6.6
and
6.7.
6.8 Shift among Quantity, Average Piece Weight and Weight Info
a. Press
[Unit]
to shift among quantity, average piece weight and weight
info,
b. Quantity Display format = numeric numbers & PCS (e.g
1000 PCS
) ,
c. Average piece weight display format = numeric numbers & weight unit
& / (slash) & PCS (e.g.
499.960g/PCS
) ,
d. Weight display format (when Piece Count Function is in effect) =
numeric numbers & weight unit & PCS (e.g.
500 kg PCS
).
6.9 To quit Piece Count Function
20
To quit Piece Count Function, press
[Func]
, then press
[Zero]
.
18
Usually, the more the sample size, the better the counting accuracy.
19
Although there is no restrictions on the minimum average price weight, for counting
accuracy, it is recommended that the average piece weight should not be less than 0.25d
or 0.25d
1
(dual range mode)
20
After quit, the average piece weight stored will be erased.
