13
5. Initial Setup
5.1 Internal Settings
Application parameters can be checked or set through internal setting
functions. Refer to
5.4
for description of all internal functions.
5.2 How To Enter And Select Internal Function
Follow the below steps to enter and select desired parameter of an internal
function.
Follow the below steps to enter and select desired parameter of an internal
function.
(For F60 ~ F99) If Setup & Calibration Control Jumper is set to enable
position (B & C), instrument will enter internal function automatically after
power on.
Should password mode be used to bypass this jumper, follow the below
steps to enter and select desired parameter of an internal function.
a. Power scale off and then power on again,
b. Press
[Tare]
during countdown,
c. Displays
F1
,
d. Scale is now in internal function.
