20
function, set F9 = ON. Press
[Unit]
to shift among various weight units.
The weight unit employed before power off will be employed when powered
on again.
6.4 Tare off the Weight of a Container
Tare function is used to temporarily set the scale to zero (such as
cancelling the weight of a box or a container) in order to get the net weight
result
6.4.1 Manual Tare
When a container is used, follow the below steps to tare off the weight of it
and to get a net weight result.
a. Remove all loads from platform,
b. Make sure that the
Zero Indicator
is on. If not, press
[Zero]
,
c. Place container on platform,
d. Press
[Tare]
,
e.
Net Indicator
appears to indicator tare is in effect and weight
displayed display is net weight.
f.
To cancel tare effect, remove all loads from platform and press
[Tare]
,
g.
Net Indicator
disappears.
Gross Indicator
appears to indicator tare
effect has been removed and weight displayed display is gross weight.
6.4.2 Auto Tare
8
(F12)
If this function is enabled, scale will assume the first stable weight applied is
a container and will tare off the weight of it automatically.
When container is removed and gross weight result = zero, tare effect will
be cancelled automatically.
6.4.3 Repeated Tare (F13)
9
When F13 is set to OFF, scale does not permit multiple tare operation. Tare
effect can only be cancelled when container is removed and gross weight =
zero.
8
Set F12 = ON to enable Auto Tare Function
9
Set F13 = ON to enable Repeated Tare Function.
