29
7.5 Electrical machine alignment
7.4 Dust examination
Note: This function can be executed when some errors appear, such as“excessive
thick”, “excessive thin” or alignments are too slowly for the fibers.
F usion s plicer can observe t he dust o n fiber, camera, objective lens and
retroreflector through the images; the dust will interfere normal fiber observation and
may lead to improper splice results. This function can detect whether there are dusts
on the fiber path and can judge whether they will lead to bad splice quality.
Operation process:
(1) Select“dust examination”in“maintenance menu”
(2) If fibers have been put in the fusion splicer , take them out and press SET key
to do dust examination.
(3)If there is no dust, the fusion splicer will remind you that operations have been
finished. If it discovers the dust, fusion splicer will indicate that “camera lens found
the dust”. P ress t he r eturn key f or t wo t imes, f usion s plicer w ill show t he dust
position, you need to clean the retroreflector and the objective lens, and then do dust
examination again until it indicates that operations have been finished.
The motor had been adjusted before leave factory, of course, these setting may
changed due to several reasons, this function automatically adjust the speed of three
motors.
Operating process:
1). Select“electrical alignment”in“maintenance menu”.
2). Put the prepared fibers to the SET key in the fusion splicer.
3).The speed of all the motors is automatic calibrated. After finish, the fusion splicer
will indicate you that the operations have been completed.
②
In autodiagnosis, there are some testing functions below
Serial
Number Inspection items
Description
Brightness detection
Motor alignment
Discharging
alignment
1
Test and adjust the LED brightness.
2
Automatic calibrate the speed of the three motors.
3
Automatic calibrate the factor of discharging current strength and the
position of fiber splice.
7.6 Discharging alignment
Atmospheric environment is always changing, such as the temperature, humidity
and air pressure, and these will make the discharging temperature varied. MINI4R
internally i nstalled temperature and baroceptor; t hey can f eed back t he external
environment parameter to the system to maintain the frame skip discharging current
strength within a stable state. However, the variation of discharging current strength
Note: If you have already do the cleaning and rep lace the retroreflector protectiv e
plate, but the dust still existing, please contact with the nearest dealer.
