the switching paddle has to be switched back into the OFF status afterwards manually.
The device is also able to report status changes to a controller (communication pattern 2) and to remotely
operate other devices (communication pattern 5). The switch can be controlled by every Z-Wave device
(communication pattern 1, 4 and 7). Any existing second switch can only be used for remote control of other
actuators according to communication pattern 5 and not to control the local switch.
Associations
A
Z-Wave devices control other Z-Wave devices. The relationship between one device controlling
another device is called association. In order to control a different device, the controlling device needs to
maintain a list of devices that will receive controlling commands. These lists are called association groups
and they are always related to certain events (e.g. button pressed, sensor triggers, ...). In case the event
happens all devices stored in the respective association group will receive a common wireless command.
Association Groups:
1 external Switch No 1 (max. nodes in group: 16)
2 external Switch No 2 (max. nodes in group: 16)
3 (max. nodes in group: 1)
Configuration Parameters
Z-Wave products are supposed to work out of the box after inclusion, however certain configuration can
adapt the function better to user needs or unlock further enhanced features.
IMPORTANT: Controllers may only allow to configure signed values. In order to set values in the range 128
… 255 the value sent in the application shall be the desired value minus 256. For example: to set a
parameter to 200? it may be needed to set a value of 200 minus 256 = minus 56. In case of two byte value
the same logic applies: Values greater than 32768 may needed to be given as negative values too.
All on/off function (Parameter Number 1, Parameter Size 1) Enables or disabled the all on / all off function
Value
Description
0
neither ALL ON nor ALL OFF are active
1
only ALL OFF is active
2
only ALL ON is active
255
ALL ON and ALL OFF are active (Default)
(c) 2016 Z-Wave Europe GmbH, Antonstr. 3, 09337 Hohenstein-Ernstthal, Germany, All rights reserved, www.zwaveeurope.com - pp 6
