Automatic Switching Off after defined time (Parameter Number 3, Parameter Size 1) Allows to automatically
turn off the relais after a fixed time set in parameter 4
Value
Description
0
Disabled (Default)
1
Enabled for relays 1, disabled for relays 2
2
Enabled for relays 2, disabled for relays 1
3
Enabled
Automated Turn Off Time for relays 1 (Parameter Number 4, Parameter Size 1) defines the time to turn off
the relais 1in case parameter no 3 is enabled
Value
Description
0 — 255 ms (Default 200)
Automated Turn Off Time for relays 2 (Parameter Number 5, Parameter Size 1) defines the time to turn off
the relais 2 in case parameter no 3 is enabled
Value
Description
0 — 255 ms (Default 200)
Commands Sent to Association Group 1 (Parameter Number 6, Parameter Size 1) Defines what status
changes cause sending out a wireless command. Zu allow double click function parameter 15 needs to be
turned to 1
Value
Description
0
turning on and turning off sends out a wireless command (Default)
1
Turning off sends a wireless command. All devices can be turned on using a double click,
dimmers will return to their last dimming state.
2
Turning ff sends a wireless command. All devices can be turned on using a double click,
dimmers will dim to 100 %.
Check status before sending a control command on external switch no 2. (Parameter Number 7, Parameter
Size 1) When external switch no 2 is switches the status of the remote device to be switches is checked or
not.
(c) 2016 Z-Wave Europe GmbH, Antonstr. 3, 09337 Hohenstein-Ernstthal, Germany, All rights reserved, www.zwaveeurope.com - pp 7
